Indoor slippers with felt soles

Room slippers "Comfort" on a felt sole Needed: • A pair of felt insoles of the required size (for us this is the 38th); • Shilo; • Yarn - 100gr / 300m, woolly; • Hooks - No. 3 and No. 2; • Needle.  Indoor slippers
At the first stage you need insoles, awl and hook No. 2. Insoles need to be tied columns without a crochet (item bn). For this, we pierce the holes in the insole with an awl, departing 5 mm from the edge. The distance between the holes should also be 5 mm. In order to avoid tightening the edges and uniformity of the strapping, perform 1 air loop between the columns. Advice: In order not to lose holes, due to the peculiarities of the felt structure, it is better to make the strapping simultaneously with the execution of the holes. That is, piercing and then doing stb. ..
 Room Slippers
For a more aesthetic appearance of the product and a light massage effect, and also so that the legs are not too hot from felt soles, we will perform a duplicating insole.She repeats the shape of the insole and runs like this: For the 38 size of the foot, we collect a pigtail of 38 points. already the main crochet № 3 and knit in a spiral: 1st р. - from art. b. n, in the first and last loop tying on 3 posts. 2 р. - again art. b. n., but 3 butt columns turn into 6, thanks to increments. 3 r. - let's shape the insole. The narrow part of knits art. b. n., in the place of its expansion, there are 2 semi-columns with a double crochet, and a wide one - with columns with 1 double crochet. Increments continue to perform. 4 p. performed by analogy with 3 p. The only difference is that now 2 p / st with n. 2 hinges are moved closer to the narrow part of the insole, relative to 3 p. 5 and subsequent series - We knit st.b.n. along the contour of the sample. Constantly applying the sample to the insole, the moment of knitting completion is determined. Tip: It is better to make a knitted pattern 3-5 mm less than the felt along the contour. Sewn a bit "vnatyag" he will not stick. In addition, the felt insole will “sit down” a little when worn. Sew on a knitted insole with a large needle to the felt frequent stitches “over the edge”.
Indoor slippers
This is how it looks fully finished sole slipper on the reverse side:
 Indoor slippers
For the upper part, slipper type 5 items in.We turn over knitting when moving to each new row, performing 1 vp lifting before tying a new row. 1. We double the number of loops by tying 2 tbsp. b. n. from one loop. 2. Knit unchanged 10 Art. b. Mr. 3. Double up (= 20 loops). 4. Unchanged 20 Art. b. Mr. 5. The increase at the beginning and at the end, as well as on the central 2 tbsp. b. n. (= 24 p.). 6. 24 Art. b. n. 7. The increase (28 items b. N.). 8. 28 art. b. n. At this point you can mark the end of attachments by tying a colored thread, or by putting on a marker or pin. Next, knit on 28 hinges st.b.n. direct and inverse rows before the beginning of lifting the foot - 11 "stripes" of the canvas. The top is slipper - "shell":
 Indoor slippers
For a more comfortable fit and reliable fastening of the top slipper to the sole, we perform “sides.” At the last 8th century, beginning from the edge, we perform a gradual reduction in the number of posts. The returns are made through a row, only on the front side of the sample from one side, starting with 2 rows until one loop is left Close the thread and close it. Similarly, execute it on the other side.
 Indoor slippers
This is how the resulting sample looks,folded in two:
Indoor slippers
Sew it on the sole, noting the middle points and matching them. It is more convenient to sew in two stages - to the sides of the middle separately.
 Indoor slippers
Tying the finished slippers with a small hook No. 2, alternating between Art. b. n. and "shells" from Art. with nakida with "pico".
 Indoor slippers
To decorate a slipper it is necessary to make a pompon. It is performed by simply winding yarn on fingers (the more turns, the tighter the pompon):
 Indoor slippers
Without removing the coils from our fingers, we slip a thread between our fingers and tie it tightly :
 Room slippers
We do not cut the ends of the thread, they will be useful in order to attach the pompon to the product. By tying, you can leave it like this:
 Indoor slippers
But still neatly cut the loops and straighten the ends of the threads.

Related News


Unusual furniture with your own hands
Deadcore: a new trend to copy the style of our dads
What does the red thread on the wrist mean - how to tie, on which hand to wear
Secrets of cooking the perfect parfait
Knit yarn ottoman
What are useful courses for pregnant women?
Should we communicate with the former Ask psychologists