To perform fine work in the form of engraving and embossing it is important to have a special tool, one of which is a small hammer. Its dimensions and low weight allow:And a belt grinding machine.At this stage, it is very important to remove all traces of corrosion, even if they are deeply eaten into metal.With the help of a drilling machine we make the necessary holes. The handle usually has an oval profile. Therefore, for each hammer will take 2-3 holes, located as close to each other. In the next stage, using a file, we process the holes obtained, connecting them until an oval profile is obtained. We also process the entire workpiece, removing all the burrs./ div>
- to do minor work without fear of damaging other elements;
- to work for a long time without fatigue in their hands;
- optimally distribute the impact weight, controlling the applied effort.
The process of manufacturing a hammer from a railway crutchChoosing a railway crutch. It must be free from obvious defects or deformations. We crush the crutch in a vice, and completely remove rust from it. For this we use a grinding machine.
>img src="https://sdelaysam-svoimirukami.ru/uploads/posts/2018-09/medium/1537772284_5.jpg" style="max-width: 100%;" alt="Hammer from a crutch">If we are going to make two hammers from one crutch, then we need to measure their length in advance, dividing our workpiece approximately in half. In each half in the middle we mark a hole for the handle.
How to play guitar songs
Single and Twin Heating Mat
Weather in Moscow in December 2017 - the most accurate weather forecast for the capital and the Moscow region
Secrets of the perfect tonal application